Technical characteristics KS-55713-3
Parameter |
Value |
Lifting moment, T/m | 80 |
Lifting capacity, t / Radius, m | 25/3,2 |
Boom length, m | 9,7 - 22,0 |
Jib length, m | - |
Max height of hook, m | |
- with main boom | 21,9 |
- with main boom and a jib | - |
Max hook depth from ground level, m | 12 |
Weight of a load, with which telescoping of a boom is possible, t | 4,0 |
Weight lifting-lowering speed, m/min | |
- nominal (with load weight ot 25 t) | 5 |
- quickly (with load weight to 6 t) | 12 |
- maximal (reeving system rate 1) | - |
Precision load-lowering speed, m/min | not more 0,3 |
Revolving portion speed, revo/min | from 0,15 to 1,4 |
Transportation speed, Km/h | up to 60 |
Support basis dimension along and across of chassis’ axis, m | |
- extended position of outrigger beams | 4,2 х 5,6 |
- retracted position of outrigger beams | 4,2 х 2,28 |
Weight of crane in transport position, t | 22,2 |
Wheel formula | 6 х 6 |
Engine of chassis | Diesel |
- model | YAMZ-53622-10 |
- power, kW | 176,5 |
Dimensions of a crane in transport position (Length х width х height), m | 12 х 2,5 х 3,6 |
Expoitation temperature, °C | from -40 to +40 |
description of the technical terms and designations, see the Glossary
Model description KS-55713-3
25-ton mobile crane KC-55713-3. The crane is designed for loading/unloading and construction/assembly operations. The crane is mounted on Ural-4320 three-axle all-terrain chassis equipped with tire pressure adjustment system and wheel-differential blocking. Tire pumping system allows to pump the tires up on the go, depending on the road paving which increases its terrain crossing capacity. This allows for crane operating in hard-to-reach areas, including oil and gas pipeline construction sites or field production sites.
Crane is operated via two axial-piston hydraulic pumps, which are set to operation by the carrier engine through the gearbox and additional PTO. Crane mechanisms have individual drives with independent control. Crane hydraulic system ensures smooth control of all mechanisms with wide range of operations adjustment levels, and allows for simultaneous combination of load-lifting operations.
Initial length of 3-sectional arm is 9.7 m which provides maneuverability and reduces space needed for the crane to move. In the extended position it’s 22.0 m, which enlarges its operating area and increases load-lifting height.
The boom is additionally equipped with 9 m jib which enlarges crane operating area and under-boom space among the 25-ton cranes.
Setting the jib from transportation position to the operating mode and back is done manually, without auxiliary loadlifting devices.
The arm can be telescoping while having weight on its hook which allows the crane to perform the following operations: place cargo at hard-to-teach spots, transport it through mounted framework. The outriggers use allows for the crane operation in confined area.
Crane operating is safe due to lots of sophisticated devices, including microprocessor load limiter with operational parameters indication on the operator’s display up in the cab. The device protects the crane from overloading, featuring coordinate protection necessary for operation in confined area. It also has integrated telemetry recording unit (so-called “black box”) and hazardous voltage protection module allowing for work close to power lines.